Floor Area Ratio (FAR) Calculator for Plot in Gurgaon
Calculate FAR in Gurgaon
Calculators
Delhi
FAR Calculator Delhi
Construction Cost Calculator Delhi
Noida
FAR Calculator Noida
Construction Cost Calculator Noida
Gurgaon
FAR Calculator Gurgaon
Construction Cost Calculator Gurgaon
Faridabad
FAR Calculator Faridabad
Construction Cost Calculator Faridabad
Our FAR Calculator will give you
Maximum Gross Permissible Area
Maximum Number of Floors
Maximum Height of the Building
Areas in the home which are not included while calculating the FAR.
Calculators
Delhi
FAR Calculator Delhi
Construction Cost Calculator Delhi
Noida
FAR Calculator Noida
Construction Cost Calculator Noida
Gurgaon
FAR Calculator Gurgaon
Construction Cost Calculator Gurgaon
Faridabad
FAR Calculator Faridabad
Construction Cost Calculator Faridabad
Floor Area Ratio (FAR) calculation for plot in Gurgaon As per local Building By Laws
Step 1:
Check the Floor area ratio (FAR) for your plot in Gurugram from the table below. If you have the plot size in sq. yards then make sure to convert it to sq. m by multiplying it by 0.83. The table shown below is only applicable for plots in Gurugram.
Area of Gurugram
Plot (sq. meter)
Permissible Ground
Coverage %
Real FAR
Total
Purchasable FAR
Total
1-75
66
165
99
264
76-100
66
165
99
264
101-150
66
145
119
264
151-200
66
145
119
264
201-250
66
145
119
264
251-350
60
125
115
240
351-500
60
120
240
501 and Above
60
100
140
240
Step 2:
To take an example, say, your plot size is 200 sq. yards. Convert 200 sq. yards to sq. meters by multiplying it by 0.83. After conversion 200 sq. yards comes out to be 167 sq. meters.
For a 167 sq. meters plot in Gurugram the Real FAR is 145 and Total FAR after considering the purchasable FAR is 198 (as checked from the table).
FAR = (Total area of all floors * 100)/ Plot Area
Therefore, Total area of all floors = (FAR*Plot Area)/100
Total area of all floors for 200 sq. yards in Gurugram = (200*198*9)/100 = 3564 sq. ft.
(Factor of 9 has been used to convert plot size from sq. yards to sq. ft.)
Step 3:
If you are planning to consume the full FAR of your plot in Gurugram then according to the Gurugram By Laws you can build a maximum of 4 floors. Therefore the per floor coverage area comes out to be 3564/4 = 891 sq. ft.
Note:
Balconies, Stilt Parking, Basement, Lift Shaft & Mumty are excluded from Floor area ratio (FAR) calculations. This list is not exhaustive and certain areas may get added during finalisation of drawings
FAR Calculator
Find permissible built-up area and ground coverage as per applicable Floor Area Ratio.
Note: These estimates are indicative. The final figure depends on drawings, specifications, authority norms and site condition. For an accurate quote, please contact our team.